Belt conveyors are widely used in modern industrial production and are widely used in food, pharmaceutical, light industry, mining and other industries. However, the belt conveyor is susceptible to the hazards of various pollutants in the working process, such as dust, water, oil, grease, particles, etc., which is easy to cause problems such as reduced cleanliness, aging equipment, and reduced production efficiency. The traditional way of cleaning the belt conveyor has certain damage and damage to the belt conveyor, and the cleaning effect is also limited, which is difficult to achieve the robustness and reliability of the system. Therefore, it is an urgent technical problem to be solved to study a belt conveyor cleaner transformation technology, which can effectively clean up the dirt on the conveyor belt, reduce the damage to the equipment by cleaning, and improve the reliability and operation efficiency of the equipment.
At the heart of the belt conveyor cleaner retrofit technology is the use of high-pressure water jet technology to clean the belt. Traditional cleaners typically use steel, rubber, or polyurethane frits to remove dirt from the belt, but this cleaning method is sketchy and does not allow for complete removal of dirt such as rust, glue, dye, and grease. Therefore, high-pressure water jet technology is expected to replace traditional cleaners as a new cleaning technology.
High-pressure water jet technology is one of the most effective belt cleaning technologies available. It has the following advantages:
1. Efficient cleaning: With high-speed, high-pressure water flow force, it can effectively remove the dirt on the conveyor belt, and even in the case of high dirt adhesion, it can still be cleaned quickly and effectively.
2. High safety: The high-pressure water jet technology can clean the conveyor belt without using chemicals, so it will not cause pollution to the environment and the human body.
3. Energy saving and environmental protection: high-pressure water jet cleaning does not need to consume too much electricity, and saves a certain amount of cleaning water resources, which saves energy and water resources to a certain extent.
4. Long service life: The traditional cleaner uses a scraper to clean the conveyor belt, which is easy to cause damage and wear of the belt and reduce the service life of the belt. The high-pressure water jet technology can thoroughly clean the conveyor belt without causing damage and wear to the belt, which can extend the life of the belt.
