In order to better apply high-pressure water jet technology for belt conveyor cleaning, the conveyor must be individually modified. The specific embodiment is as follows:
1. Transform the guide rail: In order to make the high-pressure water jet technology better clean the conveyor belt, the structure of the conveyor guide rail must be changed, so that the contour line of the high-pressure water jet technology is more consistent with the positioning trajectory of the conveyor belt, and the cleaning quality and cleaning efficiency are ensured.
2. Change the nozzle: In order to make the high-pressure water jet technology have a stronger cleaning ability, the nozzle structure in the existing water washing device should be changed. Usually there are two kinds of nozzles: copper nozzle and ceramic nozzle, copper nozzle can better deal with some deposits with higher hardness, and ceramic nozzle can better remove some soft dirt. When using high-pressure water jet technology, different nozzles are selected according to different contaminants.
3. Change the work process: on the basis of the existing conveyor, the high-pressure water jet nozzle is installed, after the cleaning procedure is started, the nozzle will be driven by the motor to move back and forth, and the high-pressure water jet will be sprayed on the conveyor belt for cleaning in the process of moving, according to the actual situation, the cleaning time can be set according to different loads, stain degrees and the characteristics of the cleaning sample to maximize the quality and reliability, and ensure that this operation is carried out in a timely, rapid and accurate manner within the required duration.
The following effects can be achieved by transforming the belt conveyor with high-pressure water jet technology
1. It can effectively clean the dirt on the conveyor belt and improve the cleanliness of the conveyor.
2. It can reduce the damage and damage to the equipment by cleaning, and prolong the service life of the equipment.
3. It can improve the reliability and operation efficiency of the equipment, reduce the failure rate of the equipment, and reduce the maintenance cost.
4. The cleaning process will not cause pollution to the environment and the human body, and meet the requirements of environmental protection.
To sum up, the belt conveyor cleaner transformation technology is a new cleaning method with high-pressure water jet technology as the core, which has the advantages of high cleanliness, low destructiveness, high energy efficiency and long service life, so it has been widely used in modern industrial production and will play an important role in future industrial production. But to make effective use of this technology, traditional cleaners must be adapted to the operation of high-pressure water jet technology.
