We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
The roller is a key component on the belt conveyor, it is distributed along the full length of the conveyor, the amount is large, the weight accounts for about one-third of the weight of the whole machine, and the performance parameters of the belt conveyor have a close relationship with the performance of the roller, and its running resistance, noise during operation and vibration of the conveyor belt are also related to the support.
The conveyor cleaner includes fixed pulley block, wire rope, connecting rod, rubber scraper assembly, counterweight, split sliding bearing, metal scraper assembly and other components, and the following is a brief introduction to each component and its function.
In view of the above problems in the previous news, there are two solutions: one is to move the coal cleaner forward, so that the cleared coal is directly pulled away on the previous belt; The second is to increase the height of the roadway, so that the transfer point of the front and rear two belts has sufficient height within a certain range.
Sweep the adhesive tape of the coal dust that has been adhered to. As we all know, the raw coal transported from the mining face contains different degrees of moisture, and it is easy to bond the fine pulverized coal to the surface of the tape. If the pulverized coal bonded to the tape is not cleaned, the pulverized coal will be brought into the belt storage bin and the roller under the entire bottom belt in the empty section (i.e., the bottom belt), and it will be mainly deposited in the belt storage bin.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies.
Privacy Policy
26 2025-03 
20 2025-03 
19 2025-03